24-bit/1kHz A/D conversion, Portable Digital Indicator

TD-01 Portable

For various test and fields, ist's easy to check anywhere

TD-01: Portable Digital Indicator

TD-01 Portable is a digital indicator for strain gauge type transducers such as Load-cell, Pressure transducer and Torque meter.

Load, Force and Torque value is shown as Numeric value and Waveform. Clear color LCD has been equipped and it allows functional viewing.

24bit/1kHz high performance A to D converting, Wire breaking detection, Data storing and TEDS support are realized even it portable and budget price.

Various advanced functions are condensed in compact body!

High-performance color graphic LCD screen

  • 2.4" color TFT LCD provides great visibility and a variety of information display.
  • It can be displayed in the color behavior judgment.
High-performance color graphic LCD screen

Waveform & bar meter display function

  • Graphical chart allows users to check input signals instinctively.
Waveform & bar meter display function

TEDS function (Automatic calibration)

  • TEDS function reads the calibration information to automatically, and records calibration values when the power is turned on.
  • Sensor information can be displayed and rewritten.
TEDS function (Automatic calibration)

Indicator value list

  • This function can display a list of recorded indicator values.
  • Waveform screen can be recorded, displayed and compared.
Indicator value list

Static Strain Display Mode

  • Show the input signal with the strain amount unit.
  • This function makes it easier to check load-cells for plastic deformation.
Static Strain Display Mode

Interrupt Check

  • Disconnecting becomes readily apparent at a field.
  • If the possibility of an interruption is detected, the location of the possible interruption will be shown in red.
Interrupt Check

Dual Input

  • Round connector (NDIS7P)
  • Connecting with the terminal bank
Dual Input

Dual language Support (English and Japanese)

  • Japanese / English changeable.
Dual language Support (English and Japanese)

Multiple power supply system

  • Continuous operation time on four AA batteries power is approximately 24 hours (when the EVOLTA alkaline batteries are used).
  • USB bus power can enable the unit to drive for many hours continuously.
Multiple power supply system

D/A output

  • You can achieve analog output that corresponds to the unit indicator value as voltage output within ±2V.
  • The unit is available as a dynamic strain amplifier.
D/A output

TdDataPicker Data Management Software

"TdDataPicker" is the software for management of data recorded by TD-01 Portable, and this is provided without any charge.

"TdDataPicker" allows you to store recorded data in CSV format and show saved indicator values and graph data by a simple operation.

File storage

This software can save data recorded in TD-01 to computer as CSV format files.

File storage

Indicator value list details screen

Indicator value list details screen

Graph list details screen

Graph list details screen

System requirements

Recommended PC spec

Processor equaling or surpassing than Intel Core 2 Duo Computer with 1Gb or more memory

OS supported

Windows 7/ Windows 8.1/ Windows 10 (both 32bit OS and 64bit OS)

Small and Light-weight Portable type

W85×H140×D35mm (without protrusions)

Specifications

Compatible sensors Strain gauge transducer
Signal input terminals Round connector(NDIS7P)/terminal bank(connect only one at a time)
Excitation Voltage DC, 2.5 V ±5% (30mA maximum current)
Signal input range ±5 mV/V
D/A output ± 2V
Equivalent input/TEDS Calibration range 0.3 mV/V – 5.0 mV/V
Calibration
precision
Within 0.1% F.S. (when using a 1m standard TEAC Φ8,
6-core shielded cable with 350Ω impedance, when 5mV/V)
Precision Nonlinearity Within 0.01% F.S. + 1 digit (when 5mV/V)
Zero drift Within 0.5 μV/°C (input conversion value)
Gain drift 0.005%/ºC or less
A/D conversion 1000 times/second, 24-bit
Digital filter Moving average
(select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048)
D/A output Output connector BNC
Output voltage ±2.0 V
Resolution 70.16μV typ
Nonlinearity 0.02% F.S. or less
Zero drift 0.1 mV/ºC or less
Gain drift 0.003%/ºC or less
TEDS function IEEE1451.4 class 2 mix mode interface
Display Display 2.4" color TFT LCD
Display modes Setting screens, indicator value digital display, graph display,
recorded data list display, static strain display
Languages Japanese/English
Indicator value Display range -99999 to 99999
Decimal point Display position selectable
Displayed items Calibration
settings
Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration)
Function settings High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, motion detect, zero tracking, digital zero, digital zero offset, zone definition, hold mode, control lock, minimum grid, digital zero limit, clear digital zero, select data output, D/A converter
Sensor value memory Six types of calibration values for each connected sensor
Hold functions Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom)
Data recording Indicator value 300 maximum
Recorded contents: ID number, date and time, recording mode, sensor value memory number, indicator value
Graph recording 8 maximum
Recorded contents: ID number, date and time, sensor value memory number, trigger mode, graph waveform
Power supply 4 alkaline or NiMH AA batteries USB bus power (built-in Micro-USB B connector)
Operating temperature range 0℃ to 40℃
Storage temperature range -20℃ to 60℃
Operating humidity range 85% RH or less (without condensation)
Applicable standards CE marking, VCCI (Class A), FCC (Class A)
External dimensions (W×H×D) Approximately 85mm × 140mm × 35mm (without protrusions)
Weight About 320 g (including batteries)
FAQ

Q. How many hours does TD-01 Portable work by battery power?

By using specified Alkaline battery, TD-01 Portable works around 24 hours continuously. Other type battery can be used as well.

Q. How many hold value can be stored?

Up to 300 hold data can be stored in TD-01Portable.

Q. How many waveforms can be stored?

Up to 8 waveforms can be stored in TD-01 Portable.

Q. How can I review stored data by PC?

TdDataPicker software allows to review stored data in TD-01 Portable. And it can be downloaded from our web site.

Q. How load-cell can be connected?

TD-01 Portable has input terminal for bare cable and connector for NDIS Japanese standard.

Q. Can both connector and terminal be used at a time?

No, only one connection is allowed.

Q. How does TD-01 Portable read TEDS data?

Calibration completed automatically by reading calibration data from load-cell when booting up. And it can read TEDS data by manually as well.

Q. Can sensitivity information be stored in TD-01 Portable?

Up to 6 cases can be stored in TD-01 Portable.

Q. Can condition of settings be stored in TD-01 Portable?

Up to 6 cases can be stored in TD-01 Portable.

Q. Can it be operated by AC power?

USB bus power available, so you can connect equipped USB cable to USB power adapter.
USB power adapter is not equipped.

Q. Can it be operated by PC USB bus power?

Yes, you can connect equipped USB cable to USB port to supply power.

Q. Can I change the languages?

Yes, you can. You can select English or Japanese.

Q. What is the wire breaking detection?

Estimated wire breaking part is shown as RED color.
It doesn't show estimated part, if wire breaking part are.

Q. What is the static strain function?

Static strain means that strain value when transducer gets no forces. It's called initial strain value as well and if this value is too big, transducer was damaged by overload.
So by checking static strain value, defect of transducer can be detected.

Q. Can I operate by dirty , wet hand?

For this purpose, soft case is available and it protect dust and dripping.

Q. Is carrying case available?

Aluminum hard case CS-TD01is available as an option. Couple of small load-cells are able to put in case.

Optional accessories

Carrying case (Hard) CS-TD01

Carrying case (Hard) CS-TD01

Carrying case (Hard) CS-TD01

*TD-01 Portable is put in a hard case

Carrying case (Soft) CS-TD01S

Carrying case (Soft) CS-TD01S