TD-01 Specifications


Compatible Sensors Strain gauge transducer
Signal Input Terminals Round connector(NDIS7P) / terminal bank (connect only one at a time)
Excitation Voltage DC, 2.5 V ±5 % (30 mA maximum current)
Signal Input Range ±5 mV/V
D/A Output ±2 V
Equivalent Input / TEDS Calibration range 0.3 mV/V to 5.0 mV/V
Within 0.1% F.S. (when using a 1-m standard TEAC ∅ 8 mm,
6-conductor shielded cable with 350Ω impedance,at 5 mV/V)
Precision Nonlinearity Within 0.01 % F.S. + 1 digit (at 5 mV/V)
Zero Drift Within 0.5 μV/°C (input conversion value)
Gain Drift 0.005 %/ºC or less
A/D Conversion 1000 ×, 24-bit
Digital Filter Moving average
(select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048)
D/A Output Output connector BNC
Output Voltage ±2.0 V
Resolution 70.16 μV typ.
Nonlinearity 0.02% F.S. or less
Zero Drift 0.1 mV/ºC or less
Gain Drift 0.003 %/ºC or less
TEDS Function IEEE 1451.4 class 2 mix-mode interface
Display Display 2.4" color TFT LCD
Display Modes Setting screens, indicator value digital display, graph display,
recorded data list display, static strain display
Languages English, Japanese
Indicator Value Display range -99999 to 99999
Decimal Point Display position selectable
Displayed Items Calibration
Zero calibration / span calibration (TEDS calibration, actual load calibration, equivalent input calibration)
Function Settings High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, motion detect, zero tracking, digital zero, digital zero offset, zone definition, hold mode, control lock, minimum grid, digital zero limit, clear digital zero, select data output, D/A converter
Sensor Value Memory Six types of calibration values for each connected sensor
Hold Functions Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom)
Data Recording Indicator value 300 maximum
Recorded contents: ID number, date and time, recording mode, sensor value memory number, indicator value
Graph Recording 8 maximum
Recorded contents: ID number, date and time, sensor value memory number, trigger mode, waveform graph
Power Supply 4 alkaline or NiMH AA batteries, USB bus power (built-in Micro-USB B connector)
Operating Temperature Range 0–40 °C
Storage Temperature Range -20 °C to 60 °C
Operating Humidity Range 85 % RH or less (without condensation)
Applicable Standards CE marking, VCCI (Class A), FCC (Class A)
External Dimensions (W × H × D) Approx. 85 mm × 140 mm × 35 mm (without protrusions)
Weight Approx. 320 g (including batteries)